The Vial Aluminum Cap Sealing Machine is used for sealing glass vials. These machines have been specifically used in pharmaceutical companies. The machine puts an aluminum cap on the vials for sealing them after they have been properly filled and stoppered. The vials are injectable glass vials essentially. In accordance with the required amount of output, you can easily alter the number of sealing heads.
The steel frames and doors in this Aluminum Cap Sealing Machine is used for servicing the machine in the best possible manner. The turntable of the filling machine continuously feeds conveyor belt. The Aluminum Vial Cap Sealing Machine ensures placement at equal intervals. During the infeed star wheel, the vials pick up their seals before the delivery chute is approached. The free spinning sealing rollers then complete the sealing process of the Aluminum Cap Sealing Machine.
|Number of Heads||Two||Four||Eight|
|Production Rate||30 to 60 |
|60 to 120 |
|100 to 200 Vials/Minute|
15mm to 80mm
25mm to 180mm
13mm, 20mm & 28mm, 30mm & 33mm with the help of change parts.
|Power Supply||0.5 H.P.||1 H.P.||1.5 H.P|
|Electrical Characteristics||440 Volts, 3 Phase, 50 Hertz, 4 Wire System|
|Overall Dimension:||1250mm(L) x|
|1400mm (L) x |
850mm (W) x
|2000mm (L) x|
850mm (W) x 1800mm(H)
|(Dimension include basic machine & 30” In-feed turn table)|
|Vacuum||25 Hg. @ 300 LPM Displacement|
|Relational Humidity||Below 28%|
|Overall Dimension||2100mm (L) X 842mm (W) X 1700mm (H)|
(Dimension include main machine with in-feed turn table)