Are you looking for best Ampoule Inspection Machine Manufacturers in your region? The Automatic Ampoule Inspection Machine promoted by Multi Pack Machinery is best in class in the industry. The machine proves to be the best solution for inspecting the injectable vials and glass ampoules of varied types.
This inspection machine consists of essentially four tracks which can be used simultaneously. These tracks are separated using nylon made six roller chains. These are accessible with the usage of a spinning assembly which has different AC drive rejection units. The units in this drive is made of 24 volts DC wiring which further ensures the safety of the users and the application of precautions to avoid any mishaps at the end of the day.
Along with the above features, this also consists of an AC frequency drive with variables to adjust speed in accordance with specific requirements. Every contact part is made of stainless steel and engineering plastics that have been especially approved by experts as per the cGMP necessities.
|Product Rate||30 to 120 Vials/ Minute|
|Input Specification: Container Diameter||25mm to 38mm|
|Input Specification: Container Height||36mm to 75mm|
|Input Specification: Container Diameter||20mm, 28mm and 30mm Butyl|
|Fill Capacity||50 mg. to 1.5 gms with the help of change parts. Up to 6 gms filling by multiple dosing.|
|Accuracy||+ 1% depending upon consistency and uniformity of bulk density of Injectable Powder under controlled level of humidity (Below 28% Rh)|
Pure Air Filter, Vacuum Pump, Oil Free Air Compressor, Online Pre-Media Filling Arrangement, Programmable Logic Control (System) with MMI Aluminum Profile Cabinet covering full machine
|Compressed Air||Max. 2 Kg./Cm2 Oil Free|
|Vacuum||25 Hg. @ 300 LPM Displacement|
|Relational Humidity||Below 28%|
|Overall Dimension||2100mm (L) X 842mm (W) X 1700mm (H)|
(Dimension include main machine with in-feed turn table)